OIL SPILL DISPERSANT
DEscr1ptION
OIL SPILL DISPERSANT is a product of superior quality, specifically designed for oil dispersion at sea, at shore and in port, either on-board or off-board. High standards and specifications have been incorporated in engineering this environmentally safe product.

CHARACTERISTICS, ADVANTAGES & APPLICATIONS:
??Non-toxic to marine life.
??Highly effective for oil spills at sea, on seashores and on solid surfaces such as docks,
decks, piers, wharfs, ship hulls etc.
??Actively promotes oil-dispersion into microscopic droplets, so that the maximum
surface area can be treated with rapid bacterial degradation.
??Has been tested and approved by the various regulatory agencies.
??Cost effective and economical.
??Applicable to all mineral oils, crude oils, fuel oils, kerosene, white spirit and lubricant
oils.
??Rapid action – converts hydrocarbons into very fine emulsions.
Remarks

OIL SPILL DISPERSANT complies with “THE FIRST SCHEDULE OF THE PREVENTION OF
POLLUTION” (OIL POLLUTION PREPAREDNESS, RESPONSE AND CO-OPERATION)
REGULATION 1999 and GB GB18188.1-2000 “OIL SPILL DISPERSANT – TECHNICAL
REGULATIONS” CENTER OF ENVIROMENT PROTECTION OF MINISTERY
COMMUNICATION (CHINA)
TYPICAL PHYSICAL PROPERTIES
Color : Light Brown
Specific gravity (25°C) : 0.95
Flash Point : 69°C
APPLICATION AND USE

A. Dosing Procedure
At Sea: The quantity of OIL SPILL DISPERSANT to be used depends on three main actors:
the quantity of oil spilled, the type of oil spilled and the weather conditions (prevailing and
forthcoming). However, experience and expertise have proved that an adequate volume of
OIL SPILL DISPERSANT to be used is 1 liter per 15 -20 square meters (1 gallon per 75 – 100
square yards) as tested on a spillage of crude oil.
At Shore: The quantity of OIL SPILL DISPERSANT demanded in this case, depends on the
size of contamination in the affected area. Repetition of the cleaning process may be
necessary, until oil-spill elimination is complete.
On Ship: The quantity of OIL SPILL DISPERSANT required here, is analogous to the case of
shore contamination. That is, the application of the cleaning process should be carried out on
the contaminated surface, as many times, as is required.

B. Cleaning Procedure
At Sea:
1) Determine the size and kind of oil-spillage.
2) Prepare the tools necessary to apply the product, undiluted.
3) Spray the desired quantity of the product with the appropriate spraying equipment, over
the oil spill.
4) Wait for a few minutes until oil spill has emulsified.
5) Is important to keep in mind that emulsification occurs when the OIL SPILL DISPERSANT, the spilled oil and seawater are mixed.
6) In the case of a persistent/stubborn oil spill, repeat cleaning process until oil spill
elimination is complete.
At Shore: 1) Follow steps 1, 2, 3 as described in part “At Sea”.
2) Let it soak for a few minutes and remove from the treated area.
3) Rinse thoroughly by applying high pressure water source.
4) Repeat cleaning of contaminated area if necessary.
On Ship: 1) Follow steps 1, 2, 3 as described in part “At Sea”.
2) After spraying and/or pouring, mix thoroughly using a brush, mop, sponge or any other
stirring device feasible to move with rapid and irregular action.
3) Pour water over the treated surface and mix vigorously.
4) Rinse thoroughly by applying high pressure water source.
5) Repeat cleaning if necessary.

IMPORTANT NOTICE: The crew that will perform the oil spill dispersion must
take all the precautionary measurements required before the beginning of the
process.
SAFETY AND HANDLING
HANDLING Handle with care. Store in dry, cool and well ventilated environment.
SAFETY IMMEDIATE ACTIONS
Eye Contact Avoid Eye Contact. Otherwise, flush with plenty of water for a few
minutes. Seek medical attention.
Skin Contact Avoid Skin contact. Otherwise, wash contaminated area thoroughly
with water. Seek medical attention.
Inhalation Do not breathe gas/vapors. Otherwise, seek fresh air source at once.
Seek medical attention. In case of insufficient ventilation, wear
suitable respiratory equipment..
If Swallowed Avoid ingestion. Otherwise, consume considerable quantity of water.
Do not induce vomiting. Seek medical attention.
General
instructions
Avoid spillage, splashing and mishandling. Precautionary measures
for body protection are strongly recommended before use.
PACKING SIZE: 25 LITER, 200 LITERS PAIL/DRUM
Read the Material Safety Data Sheet before using this product
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or product label.